We offer a full menu of ski and snowboard tuning and repair. Years and years of experience from a well-established business means we know what it takes to enhance your time on the mountain. We service just about any alpine ski, boot, binding or snowboard, along with Alpine Touring and Splitboarding equipment.
Personalized Service: Let us know what you need! We'll help evaluate your gear and provide the best options to keep it maintained the way you want!
Fast turnaround: We realize you either are lucky enough to live here and want to get to the mountain every day, or are here for a shorter time and want (need??) to maximize your time on the mountain. In fact, we still have a sign from the old days hanging up that says "Mounting while you wait". These days we can't promise we can do everything you need while you wait, but in some cases we can, and will! If not, we strive to turn the work around as soon as we can so you can get back to the mountain.
Years of knowledge: Not everyone is going to come in asking for a buckle replacement for a 1976 Caber Alfa (if you do, give us enough time and you might be surprised), but having been around for a while we generally can quickly diagnose an issue.
It's what we do: This is our full-time job -we're focused on alpine ski and snowboard products and are committed to servicing them.
Evaluation of ski to determine current state of base flatness & edge bevels.
Stone grinding to regain flat base.
PTex base repair. (Damage requiring base welding or specialized repair are billed separately.)
Base and side edge bevels set. Special requests can be accomodated.
V-Edge an option if desired.
Finish grind
Base edge polished
Machine wax wheel & polish
Full Tune
$75
Base repair/p-tex where needed. Damage requiring base welding or specialized repair are billed separately.
Base stone grinding
Base and side edges sharpened and ceramic finished.
Finish wax and polish (machine)
We can accomodate special requests (side edge angles, etc) after evaluation of the ski
Premium Sharpen & Wax
$59
Same as Full tune above, minus the base repair!
Great choice if the base and ski overall is in good shape
Sharpen & Wax
$30
Basic level edge sharpening
Universal wax and polish (machine)
Performance Hot/Iron Wax
$25
Hot waxing - Iron, scrape and brushing with Swix PS wax (temperature specific)
Universal Hot/Iron Wax
$15
Hot waxing - Iron, scrape and brushing with universal temperature wax
Base & Edge Repair,
Base Welding,
Epoxy Repairs
$10 Minimum
Deep base damage (especially to the core) requires more than just P-tex repair. Base welding provides a better bond to the materials under the base material
This type of repair should be followed by our Full or Premium Tune
General Labor rate applies
Labor Rate
$80/Hour
For services charged by time, this is our current hourly rate
Boa Lacing System
$20 Min
Broken lace or reel? We try to keep lots of parts on hand and can get your Boa lace system working again.
Did you know that the dial and lace are guaranteed for life from BOA Technology? We just charge the labor to repair
Binding Mounting/Installation
$25
Full binding mounting or stance and angle adjustment
Splitboard Binding
Mounting & Setup
$50
We're an authorized dealer and are familiar with Voile, Spark R&D, and Karakoram split bindings and have previously sold many others.
Plan ahead - allowing us a little extra time to work on these setups is super appreciated!
Full Tune
$75
Base repair/p-tex where needed. Damage requiring base welding or specialized repair are billed separately.
Base and side edges sharpened and ceramic finished.
Finish wax and polish (machine)
Premium Sharpen, Grind & Wax
$59
Same as full tune above, minus the base repair!
Great choice if the base and board overall is in good shape
Premium Sharpen & Hot Wax
$39
Side and Base edge sharpening.
Iron/Hand wax & scrape.
Performance Hot/Iron Wax
$25
Hot waxing - Iron, scrape and brushing with Swix PS wax (temperature specific)
Universal Hot/Iron Wax
$15
Hot waxing - Iron, scrape and brushing with universal temperature wax
Base & Edge Repair,
Base Welding,
Epoxy Repairs
$10 Minimum
Deep base damage (especially to the core) requires more than just P-tex repair. Base welding provides a better bond to the materials under the base material.
General Labor rate applies
Climbing skins cutting (AT Skis or Splitboard)
$40
Full cut, trim and installation of universal tip and tail clips (ski or snowboard)
$20 for Skins that are sized and only need trimming the width to fit
Alpine Boot Lifter Installation
$40
Install lifters
Router toe and heel to DIN specifications
Booster Strap Installation
$25
Installation only. Does not include the cost of the Booster Strap
Boot modifications,
stretching/repairs
$20 Minimum
Boot stretching, punching, grinding, buckle repair etc.
Replacement sole installation
General Labor rate applies
Hotronic Installation
$25
Install heating elements, Cambrelle covers and strap clips for battery. (Parts not included)
Pole Cutting
$15
Yes, on occassion we still find a need to do this!
Race Prep 1
$59
Pull/Remove Sidewall Material
Set Side Edge Angle (set by Wintersteiger Jupiter) (2 or 3°)
No Base grind, no base bevel set.
Hand/Iron Wax, Scrape, Brush with Swix PS7
Race Prep 2
$99
Pull/Remove Sidewall Material
Polish edge contact points
Grind & Blank base
Set base bevels to desired degree, polish finish optional
Set edge bevel to desired degree in Wintersteiger Jupiter
Race structure applied:
Thumbprint (PHM), Tech (KA) or Speed (ML3))
Wax Swix PS7 or BP88
Race Prep 3
$139
Pull & Sand/Polish Sidewalls
Shape topsheet tips & tails, file/shape tail
Polish edge contact points
Grind & Blank base
Set base bevels to desired degree, polish finish optional
Set edge bevels to desired degree in Wintersteiger Jupiter
Race structure applied:
(Thumbprint (PHM), Tech (KA) or Speed (ML3)
Wax Swix PS7 or BP88
Binding Lift Installation
Varies
Install & measure binding lift stack height.
Can be performed during mount at no additional charge with purchase of lifter kits at the time of binding mounting.
Alpine Boot Lifter Installation
$40
Install lifters
Router toe and heel to DIN specifications
Booster Strap Installation
$25
Installation only. Does not include the cost of the Booster Strap
Boot modifications, stretching/repairs
$20 Minimum
Boot stretching, punching, grinding, buckle repair etc.
Replacement sole installation
General Labor rate applies
Hotronic Installation
$25
Install heating elements, Cambrelle covers and strap clips for battery. (Parts not included)
Pole Guard Install
$15
We'll handle this for you!
More things we can do:
We stock a large variety of boot replacement soles. It's important to be sure your boot sole is within spec, and will often see boots with heels and toes worn past the tolerance allowed. Many times, we can simply replace the sole for you.
Moving a binding from one ski to another? Great! Keep in mind the brake may or may not be compatible with the new ski. We keep a variety of stock in brakes from Marker, Salomon and Look and can simply install a new brake to keep you going.
Hotronic testing. We're equipped with Hotronic battery testers, infrared thermometers and are able to diagnose if there is something wrong with your heating system. We are stocked with replacement parts (heating elements, batteries, and more) to keep you warm.
Replace the Ti heeltrack in a Z series Salomon binding? Yup, we probably have a few of those left in stock..
